Although most people are concerned with the benefits of wireless networks and the benefits by being connected to the Internet connection, rarely do they consider the importance about the security of their network. A wireless network, in spite of its numerous advantages of, is a risky target to threats from outside such as malware, hackers, and viruses, and other malware that could harm networks in significant way. www.webroot.com/safe

Network experts can speak at long about the various ways to protect his network. But, there's a procedure step-by-step must be followed for ensuring that the network is secured and secure against external and unauthorised access.

Guidelines to ensure that the security of your Wireless Network secure

The step-by-step process begins by keeping the instructions manual in your pocket despite any obstacles and then following the instructions below.

Step 1: The first step is to log into the controls panel for your router. This is accomplished by opening the browser and entering '192.168.1.1" into the address box in the upper right. It is important to note that this is the default IP address, which could change based on the manufacturer. Go through your instruction manual to determine the exact IP address or contact the manufacturer if they do not have the instruction manual.

Step 2: After entering the IP Address and pressing Enter you will be directed into the Login page. Here you will be required to input an Login name and Password The information is included in the manual, too. In the majority of cases you will see that you will see that the Login names as well as the Password are entered using "admin" or "password". The password field is left empty and users are left with "admin" as the Login name. After you've managed successfully to input the right data it is advised to alter the default password as hackers will be aware of this.

Step 3: On the page for configuration you must activate the encryption, where you are able to either use WPA or WEP 128 bits. Choose a password of choice that you can easily remember, but avoid choosing one that is too obvious to hackers.

Step 4: The default SSID or network name is often a way for third-party users to gain access to the network. It must be changed promptly to ensure a secured and secure network. 

Step 5: A MAC Filtering feature is an option where you are able to allow only those computers to connect to the network you know about and would like to share your network connection with. For this purpose you must collect the MAC addresses of all the computers and then enter them into the configuration screen on the router or Wireless Access Point. The filtering option has to be turned on to stop the process. www.webroot.com/secure

In addition to the instructions above users should follow, they must to buy and install one of the most popular Antivirus software. Examples of which include Webroot Antivirus. These programs help ensure that the system is protected from worms, viruses and Trojans which get into the system via open ports and can damage disk drives.