It is not difficult to see that HP has established its name across the market for its laptops that are impressive. But sometimes, users are faced with the situation that the HP laptop is powered on but it is not charging. While the reasons behind problems can be many, however, there are many methods to remove them. To learn more about this you should look at this guide. Read more hp laptop plugged in not charging
Why is My HP Laptop Connected but Not Charging?
To fix this issue it is necessary to determine what's causing the issue initially. Therefore, we have listed the possible factors that could be responsible for the scenario.
- Utilization of surge protectors
- Errors in the AC adapter
- The excessive accumulation of laptop memory
- Battery device that is outdated or not working correctly driver
- Problems with BIOS Settings
- Loose DC Jack
- New charging system
What to do if HP Laptop is Plugged in But It's Not Charging?
Connect the charger to the laptop, and then reconnect it. After that, you can determine if the issue has been solved or not. If the issue persists then try the solutions that are listed below, and then determine which one works for you.
Solution 1 Do a Power Reset
Do a reset of the power on your laptop in order to clear the laptop's memory. Check whether the issue is resolved or does not.
- Turn off your computer, and remove the laptop's battery (if you can).
- After that remove the power cord from the laptop. Hold your power button for about 15 seconds, then release the button slowly.
- Replace the battery, and then connect the power cable to the laptop. The laptop should be turned on and you will observe the battery's health.
Solution 2 Change Battery Driver
As previously mentioned it is possible to encounter this problem if the battery driver is not up-to-date. So, it is suggested to update the driver for your battery by following the steps listed in the following.
- Start by clicking Start and enter "Device Manager" in the search bar.
- Search for batteries, and then hit the" + button. Right-click now the "Microsoft ACPI Compliant Control Method Batteries" and then click the" Update" Driver Software button.
- Select "Search automatically for the latest driver software" to ensure that Windows will perform the same thing for you.
- Restart your laptop and the battery is installed. Verify if the issue is resolved following this procedure or it does not.
Solution 3. Install your HP Laptop BIOS
Try updating the BIOS on your HP laptop. As we mentioned before the issue could be due to damaged or defective BIOS settings. It is easy to go to the official site that is owned by HP to download the most recent BIOS upgrade for the HP laptop.
It is important to perform the update under surveillance and seek assistance from a qualified professional prior to commencing the process of updating.
You can also perform the BIOS update using the device manager, following the steps in the following.
- Click Start and search for "Device Manager" in the search box.
- Click on Firmware, then expand it. Make sure to double-click System Firmware and then click on the Driver tab.
- Click on" Update" Driver followed by "Search automatically for the latest driver programs".
- After the update has been successfully downloaded, follow the prompts that appear in your computer screen.
Solution 3: Check Your Hardware
A lot of times problems can be due to either the AC cable or even the power connector on the laptop. Therefore, you must examine it. Verify that you're not using any surge protectors and your notebook is linked to a socket.
Also, conduct an accurate analysis of the AC adapter and determine whether it's damaged or not. Replace it with a brand new one if that is the scenario.
Solutions 4: Search for problems in the Charger
The issue could also be from issues in the connection between the battery or the connector. If you observe that the pin of your charger is bent on one side, it is possible that the issue may be by this. Therefore, in such instances, it is advised to follow the guidelines below.
Take the charger adapter off the power outlet. Examine the opposite face of the device to check whether there is a bent pin or not. If it's bent, try to get it to the center. It is crucial to be careful to do it in a manner that won't break.
If none of these solutions are working, then you should look at your DC power jack to determine whether it's loose. It is possible to change it out with a brand new one if it's not connecting properly. If the issue persists, you can replace your charger with a fresh one.
These are a few options that you can follow to be able to solve the issue in which you're HP laptop is powered on but isn't charging.